O'ring 123 Viton 75A 29.82±0.30 x 2.62±0.08 AS 568A
123 Vito
Material: Viton (FKM), Shore A 75
Profile: O-ring AS568A (dash 123)
Dimensions: ID 29.82 ± 0.30 mm, CS 2.62 ± 0.08 mm
Standards: AS568A dash 123; tolerances per AS568A/ISO 3601
Properties:
Excellent resistance to oils, fuels, hydraulic fluids and many chemicals
Good heat resistance (continuous ~200°C; short-term higher)
Good compression set resistance and sealing reliability
Less flexible at low temperatures (use caution below ~-20°C)
Typical uses:
Automotive fuel systems and engines
Hydraulic/pneumatic systems with aggressive fluids
Chemical processing equipment
Any application needing fluorocarbon elastomer and moderate hardness
Ordering notes:
Specify AS568A dash 123, Viton (FKM), 75A
Confirm required certifications/traceability (MTRs, lot traceability)
For extreme low temp, dynamic seals, or aggressive chemicals, request material data sheet or consider softer/alternate compounds
For critical/regulatory uses, provide operating temps, fluids, pressure, and service type
Packaging & lead time:
Standard bulk or custom blister/box packaging available
Lead time varies with quantity and certification needs
For a quote, provide quantity, certifications required, and application details to Univergo.
n 75A 29.82±0.30 x 2.62±0.08
Product specification
Material: Viton (FKM)
Hardness: 75A (shore A)
Dimensions:
Outer diameter: 29.82 ± 0.30 mm
Cross-section width/thickness: 2.62 ± 0.08 mm
Typical applications
Sealing washers and O-rings for chemical resistance
High-temperature sealing in automotive, aerospace, and industrial equipment
Fuel system components, hydraulic seals, and oil-resistant gasketing
Key properties
Excellent resistance to fuels, oils, and many chemicals
Good high-temperature performance (typical continuous use up to ~200°C depending on compound)
Low compression set relative to many other elastomers
Good dimensional stability and weathering resistance
Manufacturing and inspection notes
Tolerances specified are critical for proper sealing performance; verify with calibrated measuring tools
Material batches may vary; confirm compatibility with specific fluids and temperatures prior to use
Recommended inspection: visual, dimensional check, and hardness verification (shore A durometer)
Handling and storage
Store in a cool, dry place away from direct sunlight and ozone sources
Avoid prolonged contact with solvents not compatible with FKM compounds
Shelf life varies by compound and storage; consult supplier for specific guidance
Ordering information
Specify material (Viton/FKM), hardness (75A), nominal dimensions with tolerances, quantity, and any required certifications or testing (e.g., lot traceability, material certificates, or functional testing) when placing orders.
123 Vito
Material: Viton (FKM), Shore A 75
Profile: O-ring AS568A (dash 123)
Dimensions: ID 29.82 ± 0.30 mm, CS 2.62 ± 0.08 mm
Standards: AS568A dash 123; tolerances per AS568A/ISO 3601
Properties:
Excellent resistance to oils, fuels, hydraulic fluids and many chemicals
Good heat resistance (continuous ~200°C; short-term higher)
Good compression set resistance and sealing reliability
Less flexible at low temperatures (use caution below ~-20°C)
Typical uses:
Automotive fuel systems and engines
Hydraulic/pneumatic systems with aggressive fluids
Chemical processing equipment
Any application needing fluorocarbon elastomer and moderate hardness
Ordering notes:
Specify AS568A dash 123, Viton (FKM), 75A
Confirm required certifications/traceability (MTRs, lot traceability)
For extreme low temp, dynamic seals, or aggressive chemicals, request material data sheet or consider softer/alternate compounds
For critical/regulatory uses, provide operating temps, fluids, pressure, and service type
Packaging & lead time:
Standard bulk or custom blister/box packaging available
Lead time varies with quantity and certification needs
For a quote, provide quantity, certifications required, and application details to Univergo.
n 75A 29.82±0.30 x 2.62±0.08
Product specification
Material: Viton (FKM)
Hardness: 75A (shore A)
Dimensions:
Outer diameter: 29.82 ± 0.30 mm
Cross-section width/thickness: 2.62 ± 0.08 mm
Typical applications
Sealing washers and O-rings for chemical resistance
High-temperature sealing in automotive, aerospace, and industrial equipment
Fuel system components, hydraulic seals, and oil-resistant gasketing
Key properties
Excellent resistance to fuels, oils, and many chemicals
Good high-temperature performance (typical continuous use up to ~200°C depending on compound)
Low compression set relative to many other elastomers
Good dimensional stability and weathering resistance
Manufacturing and inspection notes
Tolerances specified are critical for proper sealing performance; verify with calibrated measuring tools
Material batches may vary; confirm compatibility with specific fluids and temperatures prior to use
Recommended inspection: visual, dimensional check, and hardness verification (shore A durometer)
Handling and storage
Store in a cool, dry place away from direct sunlight and ozone sources
Avoid prolonged contact with solvents not compatible with FKM compounds
Shelf life varies by compound and storage; consult supplier for specific guidance
Ordering information
Specify material (Viton/FKM), hardness (75A), nominal dimensions with tolerances, quantity, and any required certifications or testing (e.g., lot traceability, material certificates, or functional testing) when placing orders.