Fast response from factory and delivery
Quality has been checked and tested on the product line and at the store.
Visual, chemical, temperature and pressure tests passed
Documentation available upon request
O’ring 011 Viton 75A Dimensions: ID 7.65 ±0.13 mm × CS 1.78 ±0.08 mm Material: Fluoroelastomer (Viton), 75A hardness
Key properties:
Resistant to oils, fuels, hydrocarbons, many chemicals
Continuous use up to ~200°C; short-term higher temps possible
Low compression set; good dynamic/static sealing
Often compatible with refrigerants and industrial fluids—confirm for specific media
Typical uses:
Fuel systems, hydraulics, oil seals, pumps, valves, fittings
Automotive, aerospace, industrial equipment
Tolerances & inspection:
ID ±0.13 mm; CS ±0.08 mm
Installation & storage:
Use compatible lubricant to ease installation; avoid excessive twist/stretch
Store cool, dark, away from ozone and sunlight
Ordering:
Specify quantity and packaging; contact Univergo for bulk/custom sizes or hardness
Safety:
Follow standard industrial hygiene and material-handling guidelines. Install best with other o’ring (used), if to small, with flat string under, going around until flash in the lubricated, neat groove .
If it’s too fixed it may be small, if too loose, big. Double check documentation, ask.
O’ring 011 Viton 75A Dimensions: ID 7.65 ±0.13 mm × CS 1.78 ±0.08 mm Material: Fluoroelastomer (Viton), 75A hardness
Key properties:
Resistant to oils, fuels, hydrocarbons, many chemicals
Continuous use up to ~200°C; short-term higher temps possible
Low compression set; good dynamic/static sealing
Often compatible with refrigerants and industrial fluids—confirm for specific media
Typical uses:
Fuel systems, hydraulics, oil seals, pumps, valves, fittings
Automotive, aerospace, industrial equipment
Tolerances & inspection:
ID ±0.13 mm; CS ±0.08 mm
Installation & storage:
Use compatible lubricant to ease installation; avoid excessive twist/stretch
Store cool, dark, away from ozone and sunlight
Ordering:
Specify quantity and packaging; contact Univergo for bulk/custom sizes or hardness
Safety:
Follow standard industrial hygiene and material-handling guidelines. Install best with other o’ring (used), if to small, with flat string under, going around until flash in the lubricated, neat groove .
If it’s too fixed it may be small, if too loose, big. Double check documentation, ask.
Fast response from factory and delivery
Quality has been checked and tested on the product line and at the store.
Visual, chemical, temperature and pressure tests passed
Documentation available upon request